Wood Working: walnut

Showing posts with label walnut. Show all posts

Wednesday, February 12, 2014

Walnut Quilt Rack

Quilt rack 31"x29"x10"

Catching up on postings, I have a number of projects going and that has kept me away from the computer, that and it is warming up here, so the golf clubs are getting more attention that the L-N #4.
This quilt stand is made of walnut and ash and is 31"w x 29"h and 10" deep. I turned the 7/8" rods from ash I had on hand.
The rods and stretcher are wedged through tenons and those were all cut by hand.

Applied quilt block design

The applied quilt block design is made up from a number of different exotic woods (actually some pen blanks).

The finish is my standard General Finishes semi-gloss and I topped it off with a coat of Mylands wax.

Tuesday, February 4, 2014

Walnut Quilt Rack

Quilt rack 31"x29"x10"

Applied quilt block design

Tuesday, January 28, 2014

a claro walnut slab desk with a secret compartment

well, here they come ... first project in a group of six claro walnut slab pieces that will be finished in the next two weeks ... we have this desk, a 12 table, a 10 table, a coffee table and a small bench, all with steel bases of one form or another ... this desk is about 42 x 66 and is sporting a new dan/sam welded steel base with our natural finish ... the slab wasnt big enough to be a dining table, though now it could seat 6, even with the bases close to the ends .. the metal at the floor is actually kind of cool when you are sitting at the end. click the photos to enlarge them ...

the base is a pair of 1.5 x 3" rectangular tube trapezoids with vertical aprons. it was sams brainstorm to weld the long aprons vertically rather than on the 10 degree angle, which allowed us to more easily construct the drawer box.

without the desk attached

top view .. this desk is one of the walnut slabs from back in february. we cant wait for customers to come along forever ... actually, this piece is for a show were in that is opening in housatonic, massachusetts on the 24th. more on that later.

one 24" drawer centered on the 45" apron.

and, one of our favorite things, the secret compartment ... push down on one end of the pencil tray and lift it out ...

to expose the folding brass tool sam made to hook onto the small drawer at the back of the case.

the tool unfolded ...

hooking onto the compartment ...

ta dahhhh ... 6.5 x 23 by 2" deep ... room for lots of stuff ...

here are

some of the other projects. some of which will get their own blog post as they are finished. this is a small bench we used to get the color and finish right on the 12 expresso finish slab above it.

this is a 10 with a rainbow finish base that will be in stowe on the 31st.

and this is another one for the upcoming show ... a coffee table 45 x 55 x 18 ..

and this 10 table is waiting for the apartment in nyc to be finished ... its got a blackened steel base and incredible curl ... best slab ever .... all for now